12V10A IP20 DC to DC Multi-phase Dump Trailer Battery Charger
Battery type: Lead Acid, AGM/Gel, Calcium, and LiON. Numerous protections, 6-Phase charging cycles: Initial, Recondition, Bulk, Absorption, Check, Maintenance. IP 20 class, no glue. Aluminium housing.
1. Qualification(Initial Phase): Check if the battery is in a good condition, charging will not begin if a battery is below 1.5V.
2. Recondition: Work up the battery at a slightly higer voltage and amperage to reactivate the battery cells to improve the depth of charge.
3. Bulk: Works the battery thourgh the pulse, gives the battery a constant current bring it up to 80% of the battery's capacaity.
4. Absorption: Gives the battery a gradually rising voltage while the current relatively reduces until its fully charged.
5. Full and Analysis (Check): Battery will be checked again to ensure it is properly functioning to be used or not.
6. Maintenance: Keeps the voltage of the battery under control.
| MODEL NO. | WEN10IP20 |
|---|---|
| Output Voltage | 14.1VDC-14.7VDC(Lead Acid) |
| 14.4VDC-15.0VDC(AGM/Gel) | |
| 15.0VDC-15.8VDC(Calcium) | |
| Output Current | 8.5A-11.5A |
| Standby Current | <0.03A |
| Input Voltage | DC 12.1V-16V |
| Efficiency | >90% |
| Cooling | Air Convection |
| Protections | |
| Input Polarity Reverse | YES |
| Output Polarity Reverse | YES |
| Output Short-circuit | YES |
| Over Heat Protection | Yes |
| Cables | |
| Input Cable and Gound | 1 cable with 2 wires |
| Wire diameter: | 10AWG |
| Wire Length | 4,000mm |
| Strip length | 50mm/10mm  |
| Output Cable and Gound | 2 wires |
| Wire diameter | 10AWG |
| Length | >300mm |
| Round terminal in end | Yes, inside Dia.: 6.4mm |
| Operation Temperature | -10℃ to 45℃ |
| Dimensions (L*W*H) | 20.8cm*13.6cm*3.8cm |
Effectively be used to charge an auxiliary or service battery from a main battery while driving, the main battery is powered by the alternator or solar panel instelled vehicle to maintain functional dual-battery system. For dual 12V lead-acid battery system, remote control panel optional. Two LEDs indicate it is charging main or sub battery. Numerous protections for safety.
Featuring 3-stage charging profiles and multiple electronic protections. Dual battery charging from a vehicle that has both solar panel and alternator charging 12V or 24V main battery to 12V auxiliary battery. For STD, GEL, AGM, CAL, and LiFePo4 batteries. IP66, resistant to dust, water, and shock damage, allows it to be installed in RV's, commercial vehicles, boats, yachts, etc. Fanless and no noise, compact size.
Featuring 3-stage charging profiles and multiple electronic protections. Dual battery charging from a vehicle that has both solar panel and alternator charging 12V or 24V main battery to 12V auxiliary battery. For STD, GEL, AGM, CAL, and LiFePo4 batteries. IP66, resistant to dust, water, and shock damage, allows it to be installed in RV's, commercial vehicles, boats, yachts, etc. Fanless and no noise, compact size.
Microchip controlled, BOU petite pure sine wave inverter 48 models are capabale of ≥88% of efficiency, <3% of transfer efficiency lost despite their reduced size....
Read More
Power saving mode, optional LCD display, AC transfer switch, etc. Well tried-and-tested devices perfectly designed for all vehicles. Can now download our App to use,...
Read More
OEM Auto Parts. Certified with IATF 16949:2016 standards. Reliability tests based on ASTM Standards.
Read More
