4000W Off-grid LCD Modified Sine Wave 12V DC to 220V AC Power Inverter
Wenchi NMSW LCD 4000W
NMSW4000W rear
Digital display. Two 230VAC Outlets. Interactive setup mode: Output Voltage, RCD Test, Last Error Code, Battery Size, Power Saving, Low Voltage Cut-off, and Output Frequency.
Description
Mounting LCD display frame with 6m cable. Please note that LCD display can be mounted only for 3000W and 4000W models. RCD Test is to test the earth leakage protection function is working correctly. Several Indicator & Error modes shown on the LCD Display. Feature one USB and Comms port. NMSW Inverter's SLEEP MODE will activate in 10 min without any input while turning on. MOQ is 50-500PCS, production time 90-115 days. NMSW Inverter's SLEEP MODE will activate in 10 min without any input while turning on.
LCD Display Panel Guide:
Switching On
1. Ensure that the inverter power on/off switch is in the OFF (0) position.
2. Connect source battery’s positive and negative leads by using the provided clamps with the unit’s terminals, make sure the polarities are accurate.
3. Plug the appliance into the AC output socket on the inverter, ensuring it does not exceed the maximum output power of the inverter.
4. Turn the power on/off switch to the ON (I) position.
5. The Power indicator will illuminate green and mains power will be available from the AC output plugs(s). On models fitted with a display the LCD screen will also illuminate.
LCD Information Mode
To enter "Setup Mode", press & hold the "Select" key. Press Up / Down keys to select item, then press "Select", once choose the setting, the LCD screen will flash.
Adjust setting by using Up / Down keys then press "Select" to reset.
After reset, press long the "Select" key to exit back to "Information Mode".
NMSW Inverter LCD Error Code
"The Last Error Codes" shows any previous error codes, "Battery Size" is to set the Ah rating of the battery, when a current sensor is installed and used conunctin with the this setting, the LCD display will also show an estimate of hours remaining.
Current Sensor Installation (optional):
To enable monitoring of the input current and hours remaining function, hours remaing function is an estimate of time remaining before the battery will be depleted based on the current load. The optional current sensor can should be fitted as shown in the figure.
Digital display. One Main 230VAC outlet. Interactive setup mode: Output Voltage, Last Error Code, Battery Size, Power Saving, Low Voltage Cut-off, and Output Frequency.
Digital display. One main 230VAC Outlet. Interactive setup mode: Output Voltage, RCD Test, Last Error Code, Battery Size, Power Saving, Low Voltage Cut-off, and Output Frequency.
Digital display. One main 110VAC industrial plug. Interactive setup mode: Output Voltage, RCD Test, Last Error Code, Battery Size, Power Saving, Low Voltage Cut-off, and Output Frequency.
Digital display. Two 230VAC Outlets. Interactive setup mode: Output Voltage, RCD Test, Last Error Code, Battery Size, Power Saving, Low Voltage Cut-off, and Output Frequency.
Digital display. Two 230VAC Outlets. Interactive setup mode: Output Voltage, RCD Test, Last Error Code, Battery Size, Power Saving, Low Voltage Cut-off, and Output Frequency.
48VDC to 110/220VAC Petite Pure sine wave Inverter with USB port & Aviation socket
Microchip controlled, BOU petite pure sine wave inverter 48 models are capabale of ≥88% of efficiency, <3% of transfer efficiency lost despite their reduced size....
Power saving mode, optional LCD display, AC transfer switch, etc. Well tried-and-tested devices perfectly designed for all vehicles. Can now download our App to use,...