4-Stage 12V 90A Lead-Acid Battery Charger
LCD/Digital Meter: Voltage, amperage, battery percentage, total charging capacity, end time charging timer setting, stop charging, timer time, pre-charger, high voltage.
1. Connect the charger sytem to a wall receptacle and make sure the connection is tight.
2. Connect the DC cables to the charger before making any connection to the battery.
3. Please be sure the polarity is correct before turn on the charger: red terminal<=>red
cable<=>battery(+); rlack terminal<=> black cable<=>battery(-).
4. Turn on th power that is located at the rear panel, the red LED lights on and bi-color LED will indicate the charger's stage. On the LCD(digital meter) screen will show the charger's stage and the battery's level (or O/P voltage).
5. The charger is designed in aluminum housing as its heat sink, while charging a battery, the case's temperature willl rise to about 50°C, please be careful when touching the unit.
6. Please ensure to place the charger in a well-ventilated and dry environment.
4 stage charge cycles: Pre-Charge, Equalizing Constant Current, Constant Voltage, Pulse Charge & Float Charge. Digital meter indicating numerous charger status and battery level, LED display. Short-circuit, overload, reversed polarity protections. When the charger is in Equalizing stage, cooling fan speeds up; when in Float charging stage, cooling fan slows down or stop spinning. Manual Built-in Pulse Charging Switch. Twin outputs for charging batteries independently.
| MODEL NO. | WHC-12V90A | |
|---|---|---|
| Kind of battery | Lead-Acid battery | |
| Input | Voltage | 200V-240V |
| Frequency | 47~63 Hz | |
| Output | Float Charger | 13.7± 0.2Vdc |
| Equalizer Charger | 14.7 ± 0.2Vdc | |
| Current | 90A | |
| Wattage | 1320W | |
| Efficiency | >85%(at full load) | |
| Protections | Battery Reserved | Yes, by fuse burnt |
| Short-circuit | Yes, automatic shutdown | |
| Overload | Yes, current limited | |
| Cooling Fan | Speed controlled according to the charging stage | |
| Pulse Charge | Enable pulse charge function instead of float charge | |
| Current Limits | Limits O/P current to about 50%(max.) of rating current | |
| Weights(kgs) | 8.5 kgs | |
| Dimensions(mm) | 480*355*87.5 | |
Specification may subject to change based on customization, please contact us shall you have questions, thank you.
LCD/Digital Meter: Voltage, amperage, battery percentage, total charging capacity, end time charging timer setting, stop charging, timer time, pre-charger, high voltage.
LCD/Digital Meter: Voltage, amperage, battery percentage, total charging capacity, end time charging timer setting, stop charging, timer time, pre-charger, high voltage.
LCD/Digital Meter: Voltage, amperage, battery percentage, total charging capacity, end time charging timer setting, stop charging, timer time, pre-charger, high voltage.
Equalizer Constant Curent, Constant Voltage, Float 3 charging stages. Equalizer charging is more effective on standard electrolyte vented battery than sealed battery, gel battery, or NiCad battery. Cord with XLR connector for professional audio, video, and stage lighting equipment.
Equalizer Constant Curent, Constant Voltage, Float 3 charging stages. Equalizer charging is more effective on standard electrolyte vented battery than sealed battery, gel battery, or NiCad battery. Cord with XLR connector for professional audio, video, and stage lighting equipment.
Soft-Start, Constant Current (Bulk, Equalizer), Constant Voltage (Absorption), Pulse & Float, automatically switching between 5 charging modes. MOQ required, production time 90 days.
Soft-Start, Constant Current (Bulk, Equaliser), Constant Voltage (Absorption), Pulse & Float, automatically switching between 5 charging modes. MOQ required, production time 90 days.
For GEL, Deep Cycle, AGM, and Calcium batteries. LEDs indicate type of battery and status. Lead-time 90-115 days. 1 year warranty
For GEL, Deep Cycle, AGM, and Calcium batteries. LEDs indicate type of battery and status. Lead-time 90-115 days. 1 year warranty
Provides 5V/1A charger via USB port. For GEL, Deep Cycle, AGM, and Calcium batteries. LEDs indicate type of battery and status. Lead-time 90-115 days. 1 year warranty
Provides 5V/1A charger via USB port. For GEL, Deep Cycle, AGM, and Calcium batteries. LEDs indicate type of battery and status. Lead-time 90-115 days. 1 year warranty
Microchip controlled, BOU petite pure sine wave inverter 48 models are capabale of ≥88% of efficiency, <3% of transfer efficiency lost despite their reduced size....
Read More
Power saving mode, optional LCD display, AC transfer switch, etc. Well tried-and-tested devices perfectly designed for all vehicles. Can now download our App to use,...
Read More
OEM Auto Parts. Certified with IATF 16949:2016 standards. Reliability tests based on ASTM Standards.
Read More
