SMART INVERTER APP & BLUETOOTH

SMART INVERTER APP & BLUETOOTH

Smart Pure Sine Wave inverter with Detachable LCD & App & Bluetooth dongle wireless module

All WINVPA/WINVPB PSW series have covered-screw exterior housing that gives out a refreshing look and smooth touch. Pioneering engineering tech enable users to freely switch between different modes by LCD switch panel and/or the App your phone. The methodically outlined housing insulation dispatches unwanted heat.

Designed with Hi-performance microchip technology, come with various protections, power saving mode and remaining time, plus optional AC transfer switch. LCD control panel can not only be seen as a monitor, can also be utilized based on the users' desire to set or reset functional values. To enhance operating experience, PSW series are all designed to be easily carried and transported. Please note that LCD display panel kits, AC transfer switch, and current sensor kits purchase in addition.

Please scan QR Codes or search "smart inverter" by Wenchi & Brothers on Google Play or App Store on smartphone and tablet to download the corresponding application.

Elegant and user-friendly interface design, able to have more than one Smart Inverter on the device list, but whiling using can pair up with only one inverter at a time. Please note that the Smart Inverter App can only combine with Wenchi's smart inverter that has plugged in an add-on dongle bluetooth module. The LCD display panel is detachable, so when a panel is also installed, it automatically synchronizes with the App.

Smartphone, tablet and laptop compatibility

iOS 12++

Android 4.4

Devices with Bluetooth 4.0+

Feature

Up to 50m connection range in the open area

Displaying same data as Detachable LCD

Real-time parameters

Customizable settings

Prompt Notification

After download Wenchi's Smart Inverter, click on it. This page shows all the Wenchi's products that have been discovered by your smartphone, and choose on the desired device.

To see the connected smart inverter's informaiton and restore to default settings, click at the upper right corner.

Set or reset the connected inverter's values: output volts, frequency, low battery shutdown, and more.

• Output Voltage: 200V/220V/230V/240V
• Output frequency: 50 or 60Hz
• Low battery shutdown: 9.5-12.0V **Low battery alarm: always 0.5V greater than low battery shutdown value automatically. ( except 12.0V )
• Battery capacity: 90-540Ah
• Power saving mode: On/Off

Highlighted Protection Warning Indications.

Battery Low

Battery High Shutdown

Battery Low Shutdown

Overload Shutdown

Over Temp. Shutdown

Time Remaining and DC Input Current will be available once the inverter is connected with a current sensor as well.